www. b elling .com .cn 1 6v high speed inverter bl8070 description bl8070 i s cmos single inverter gate. the device is fabricated with advanced cmos technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad vcc operating range. the device is specified to operate over the 1.65 v to 6.0 v v cc range. inputs tolerate v oltage up to 6v independent of vcc operating voltage. function diagram features ? space saving 5 - lead surface mount sc70 p ackage and 1x1mm dfn package ? ultra high speed; tpd 8.5 n s typ into 50 pf at 5v v cc ? high output drive; 16 ma at 5 v vcc ? broad vcc operating range; 1.65 v to 6.0 v ? low power consumption, 1a max icc ? schmitt trigger action at input makes the circuit tolerant for slower input rise and fall time applications ? cell p hone and other portable device ? 3g module ordering information / pin configuration / marking ordering part no. package pin out marking bl8070 ca5tr sc70 - 5 oc yw bl8070 ckdtr dfn1x1 - 5l oc yw bl8070 ckdtr dfn1x1 - 4 l oc yw yw date code 5 . v c c 4 . n c 1 y 2 g n d 3 a 4 v c c 3 a 1 y 2 g n d
www.belling.com .cn 2 bl8070 absolute maximum rating parameter symbol limit unit supply voltage range v cc - 0.5~ 7 v input voltage range v in o utput voltage range v out dc input diode current i ik 20 m a dc output diode current i ok dc output current i ol /i oh 25 storage temperature range t stg - 40 to 150 ? c package power dissipation @ +70c pd 200 mw thermal resistance rating parameter device symbol limit unit package thermal impedance sot23 - 5 - 1.7 ja 252 ? c /w so23 - 5 - 1.3 206 sc70 - 5 1 42 recommended operating condition tj=25 ? c parameter symbol min. max. unit supply voltage v cc 1.65 6 v input voltage v in 0 v cc o utput voltage v out 0 v cc high - level input voltage vcc = 2 v v ih 1.3 vcc = 3 v 1.8 vcc = 6 v 3.2 low - level input voltage vcc = 2 v v i l 0.7 vcc = 3 v 1.0 vcc = 6 v 2.2 high - level output current vcc = 2 v i oh - 50 vcc = 3.3 0.3 v - 8 m a vcc = 6 0.5 v - 16 low - level output current vcc = 2 v i ol 50 vcc = 3.3 0.3 v 8 m a vcc = 6 0.5 v 16 input transition rise or fall rate vcc = 3.3 0.3 v t/v 100 ns/v vcc = 6 0.5 v 20 operation temperatu re t a - 40 to 85 ?
www.belling.com .cn 3 bl8070 electrical characteristics (unless otherwise noted) parameter test condition vcc min. max. unit ii vi = 6.0 v or gnd 0 v to 6.0 v 1 a icc vi = vcc or gnd, io = 0 6.0v 1 a ci vi = vcc or gnd 5.0v 10 pf v o h ioh = ?50 a 2.0 v 1.9 v 3.0 v 2.9 5.0 v 4.9 ioh = ? 8 ma 3.0 v 2.6 ioh = ? 16 ma 5.0 v 4.5 v ol ioh = ?50 a 2.0 v 0.1 3.0 v 0.1 5.0 v 0.1 ioh = ? 8 ma 3.0 v 0.4 ioh = ? 16 ma 5.0 v 0.5 s witching characteristics( vcc = 3.3 v parame ter i nput o utput l oad capacitance min. max. unit tplh a y cl = 15 pf 1 8.5 ns tphl 1 8.5 tplh a y cl = 50 pf 1 12 tphl 1 12 s witching characteristics( vcc = 6.0 v parameter i nput o utput l oad capacitance min. max. unit tplh a y c l = 15 pf 1 6.5 ns tphl 1 6.5 tplh a y cl = 50 pf 1 8.5 tphl 1 8.5 operating characteristics , vcc = 5 v, ta = 25 ? symbol parameter test condition typ. unit cpd power dissipation capacitance no load, f = 1 mhz 12 pf
www.belling.com .cn 4 bl8070 parameter measuremen t information note: a. the outputs are measured one at a time, with one input transition per measurement. b. all parameters and waveforms are not applicable to all devices. c. cl includes probe and jig capacitance d. all input pulses are supplied by generators having the following characteristics: prr 1 mhz, zo = 50 , tr 3 ns, tf 3 ns. v c c i n p u t o u t p u t c l
www.belling.com .cn 5 bl8070 package out line package sc70 - 5 devices per reel 3 000 unit mm package specification package dfn1x1 - 5l devices per reel 5 000 unit mm package specification
www.belling.com .cn 6 bl8070 package dfn1x1 - 4 l d evices per reel 5000 unit mm package specification
|
